The FRP First Response Pouch is an updated interpretation of the traditional blow-out medical pouch. It has an interior paracord adjuster used to set the angle of opening for the main compartment. The inside is equipped with elastic straps and pockets for organizing first aid essentials.
The FRP comes with two (2) matching TacTie® PJC5™ Polymer Joining Clips for modular attachment to any AGR or Legacy pack. The TacTie Polymer Joining Clip has been awarded United States Patent: US D796,846 S. Further, it is protected by other patents pending in the USA and internationally.
NTOA Member Tested & Recommended
AGR Product Features
- YKK® Zippers with Positive Grip Pulls
- Dual Nylon Fabric Construction - 500D Hex Ripstop & 1000D Plain Weave
- Laser Cut ATLAS™ Attachment Lattice System - Cut from 840D Nylon-TPU Composite
- Laser Cut TPU-840D Nylon Composite Attachment Backing
- Custom Fabricated Shapeshift™ Webbing
- Refined Construction with Elegant Inlays
- Fray-Resistant Gossamer™ Mesh
- Anti-Counterfeit Logo Embossed 420D Nylon Liner
- Very Visible Grayscale Interior
- Teflon® fabric protector for grime resistance and easy maintenance
- Updated interpretation of the traditional blow-out medical pouch
- Dual zippered full-length opening
- Interior paracord adjuster to set the angle of opening
- Interior elastic straps and pockets for retention & organization
- Exterior mounting surface for adding a small pouch
- Frontal 2" x 3.5" loop field for patch adhesion
- Top carry handle with D-rings
- Bottom drainage grommets
- Laser cut ATLAS™ Attachment Lattice System
- Laser cut TPU-840D nylon composite attachment backing
- Two (2) TacTie® PJC5™ Polymer Joining Clips included for modular attachment
- Props in product photos are not included
Click below to view the owner's manual for the FRP™ First Response Pouch.
- Exterior overall size: 6 (L) x 2.5 (W) x 9 (H) in | 15.2 x 6.4 x 22.9 cm View Product Dimensions Diagram
- Interior overall size: 5.5 (L) x 2 (W) x 8.5 (H) in | 14.0 x 5.1 x 21.6 cm
- Weight: 9.6 oz.
- 1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
- 500-Denier Hex Ripstop water and abrasion resistant light-weight ballistic nylon fabric
- Triple polyurethane coated for water resistance
- High tensile strength composite nylon thread (stronger than ordinary industry standard nylon thread)
- Internal seams taped and finished
- Stress points double stitched, bartacked, circular bartacked or "Box-and-X" stitched for added strength
- YKK® high strength zippers and zipper tracks
- Teflon® fabric protector for grime resistance and easy maintenance
- MAXPEDITION's nylon fabric is treated with Teflon for superb water and grime resistance.
- To clean, simply wipe down with a damp cloth. Allow gear to dry naturally.
- Do not machine wash.
- Do not use detergent or bleach.
CUSTOMERS UNDERSTAND AND AGREE TO THE BELOW TERMS AND CONDITIONS:
- Save 40% on Maxpedition AGR Series: Advanced Gear Research (CLOSEOUT SALE. FINAL SALE.) on Maxpedition.com. No purchase limit.
- Discount prices are as marked on the product page.
- Applies to this product only; cross sell items excluded.
- For new Maxpedition.com retail orders only; phone orders are not qualified.
- Can not apply additional discounts or combine with any other special offer. One promotion per order.
- Limited quantities available. First come first served and only while supplies last. No rain checks.
- All sales are final. No returns or exchanges.
- Due to high order volume, there may be a delay in processing and shipping. We thank you for your understanding.
excellent product for ifac.
Solid bombproof construction with tons of internal loading options! Not just for medical supplies!
Great Paramedic work pouch
Over the years of being an EMT and Paramedic I have become a bit more of a “Ricky Rescue”, and this is the newest edition to my Paramedic bat belt. I love this pouch. As all of us who already own anything Maxpedition, know that the quality is the best and will last a lifetime. It’s just big enough to where it’s not too bulky on my detachable belt that I put on for calls. So far I’ve only set it up for IV starts and also fit a Celox pouch in it as well so I have quick access to it if needed. I keep a simple layout with no clutter and it offers a nice “work bench” for me to set the items I’m using since the paracord can be adjusted to stop the pouch from opening to whatever angle you prefer. Mine stops at 90 degrees to give the “work bench” I mentioned. Plus that means any looser items won’t go falling out of your pouch when opened. I love being able to establish IV access without having to dig through my bag for the equipment. Last week I had two full arrest calls where I just took a knee next to an arm and popped in a line from my new First Responder Pouch while my partner just had to spike a bag and hand it to me with our first round of Epi. Was super convenient and left the bag to be easily accessed by just my EMT instead of both of us trying to grab things out of it. Love the look of the pouch and the Velcro on front. Obviously this pouch can be set up in an unlimited set of configurations and used for many different needs. The adjustable paracord and size of the retention loops inside definitely set this pack apart for medical use. As a 12 year First Responder myself, I recommend this pouch to anyone looking for a great medical pouch. My only recommendation from watching video reviews on it is to not stuff it so full of medical equipment that you can’t find what you need quickly when you need it. Make sure it stays functional if you imagine having to use it in an actual emergency.
I've been using the FRP pouch for about a year now to house a small "blowout" kit, and it's a great little pouch. It is absolutely made of quality materials and has held up well to the normal wear and tear I put it through. Generally speaking it is laid out well. The one thing I would love to see Max try to improve on are the internal strap/bungee system. They used a fairly robust elastic material which might be overkill for the inside of the pouch. The strapping itself is fairly thick which actually takes up a fair amount of room. So much so that I've actually thought about cutting it out a couple times. It's also probably too robust in that it actually doesn't stretch too well for the type of smaller items one would generally carry in a kit like this. Lastly, the way the straps are anchored on the inside tends to bunch everything up into the center line of the pouch leaving the sides unused. I'd love to see them use either a lighter weight, more flexible bungee like I've seen in some of their other pouches. And if they could come up with a way to anchor it in a manner that more evenly distributes the contents, that would be great. The other downside to placing bungees of this nature into the internals of a pouch is that you are then locked into distributing gear in accordance with how THEY have laid it out. It would be nice if there was a way that the end user could configure the tie downs. If Max could figure out a way to do that it would really set them apart from the competition.
I needed a small bag for the essentials while working. This, like the DEP bag, are perfect. They are flawless and operate in conditions they were designed for. It is the only brand of bag I will use. I have an about 10 year old Falcon II Legacy that has seen use everyday of work and looks like the day I got it. I am contemplating to the AGR line. You certainly get what you pay for.